Greenwich Village and West Village

14th St. to Houston, Hudson River to Broadway

Zones

Commercial chunk:
C1-6 x6 - Local retail district
C1-6A x3 - Local retail district
C1-7 x3 - Local retail district
C1-7A - Local retail district
C2-6 x4 - Local service district
C2-7 - Local service district
C4-4A - General central commercial district
C4-5 x2, one designated as a special purpose district
C6-1 x2 - General central commercial district
C6-2 x4 - General central commercial district
C6-2A - General central commercial district
C6-3 - General central commercial district
C6-3A - General central commercial district
C6-4 x3 - General central commercial district

Residential mixed between commercial districts
R6 x13 - General residence district

• Dwelling unit factor (DWF): 680

R6A - General residence district

• With C1-5 Overlay - with depth of 100ft in from nearest street
• DWF: Portions with C Overlay require special designations,

other portions - 680
R7 - General residence district

• With C1-5 Overlay - with depth of 100ft in from nearest street
• DWF: Portions with C Overlay require special designations, other portions - 680

R7-2 x3 - General residence district

• One segment with C1-5 Overlay - with depth of 100ft in from nearest street
• DWF: Portions with C Overlay require special designations, other portions - 680

R10 - General residence district

• DWF: 680

Mostly large, separate manufacturing districts:
M1-5 x2 - Light manufacturing district (High performance)
M1-5/R7X - Rezoned area: mixed-use special purpose district
M2-3 - Medium manufacturing district (Medium performance)
M3-2 - Heavy manufacturing district (Low performance)
MX-6 - Hudson Square mixed-use special purpose district (across from M1-5/R7X district)

CEQR Designations -D-92, D-93, D-94, D-95, E-4, two E-149 in the commercial and manufacturing zones

• Pursuant to state law, the City Environmental Quality Review (CEQR) process identifies and assesses the potential environmental impacts of discretionary actions, except for minor exemptions, that are proposed in New York City by public or private applicants and funded or approved by a city agency. A discretionary action, such as a zoning map amendment, cannot begin public review until a “conditional negative declaration” or “negative declaration” has been issued, stating that no significant environmental impacts have been identified or, if any potential impacts have been identified, a draft environmental impact statement has been completed, evaluating the significance of identified impacts and proposing appropriate mitigation.
• A letter “E” on a zoning map indicates a site where environmental requirements must be satisfied before a building permit may be issued for any development, enlargement or change of use.

Details and sources

*Density for residential district is determined by dividing the maximum development floor area permitted by the Dwelling Unit Factor (DWF), resulting in the maximum units allowed on the zoned lot http://www.nyc.gov/html/dcp/html/zone/glossary.shtml

Neighborhood map compiled from:
12a Zoning map
12c Zoning map
8b Zoning map

Zoning map source:
http://www.nyc.gov/html/dcp/html/zone/zh_zmaptable.shtml


Zoning district designations listed in this document: http://www.nyc.gov/html/dcp/pdf/zone/art01c01.pdf
and its source: http://www.nyc.gov/html/dcp/html/zone/zonetext.shtml